back to top
Call SAS

IsoCeiling Soundproofing System

High End Soundproofing for Ceilings. Superior Sound Insulation


IsoCeiling
  • The only engineered soundproofing system made for high power audio playback
  • Dampens bass vibration, eliminates shudder
  • Eliminates the structural resonant dip in TL (Transmission Loss)
  • Extends STC way beyond 125 Hz, to sub-sonic levels
  • Components include: Perimeter Gasket, RC Pads, dRC-2 Channel, WallDamp Squares & Acoustical Sealant
  • Approx. $4 per sq. ft. of surface area
  • Call to Order
Isoceiling Components Isoceiling Quantity
Iso Ceiling
The IsoCeiling out-performs all forms of standard construction by combining the necessary elements required for superb playback performance. This unique construction system offers superior sound insulation and has been developed over 15 years in the design and building of professional recording studios. The IsoCeiling system was designed with high-level musical playback in mind. The interior of the room becomes peacful & quiet and free from disturbing exterior noise while containing the sound within the room and minimizing noise leakage to the rest of the structure.

The IsoCeling system has the ability to condition the room's acoustic signature in the low-end bass frequency spectrum. Low frequency energy is absorbed into the ceiling by utilizing WallDamp material throughout the system. This reduces bass feedback and sound transmission, and results in a clean, rich sound with well-balanced frequency response. Our resilient channel includes a layer of WallDamp elastomeric copolymer so you get a "one-two" punch when it comes to stopping low frequency sound penetration. Low frequency sound produced by subwoofers is the most difficult to deal with and has nothing to do with STC ratings.

The ceiling is one of the biggest concerns for high end listening rooms and recording studios. IsoCeiling systems has unique design features that actually enhance the acoustic properties within the treated room. When walls and ceilings are fully treated with IsoDamp, sound is contained and low frequency sound vibration is converted into heat energy, never to be heard from again. This is ideal for any high powered audio application.

Iso-Ceiling comes as a complete kit and is designed to be affordable and easy-to-install by any contractor or the do-it-yourself homeowner. IsoCeiling is easy to install when you follow our included instructions and recommendations. You supply the sheetrock and screws, we supply everything else.


IsoCeiling Components

IsoCeiling is an engineered system of components that work together to enhance the classic standard resilient channel soundproofing. The first component is Perimeter Gasket, which surrounds the perimeter of your ceiling. This is a 1/2 x 2 x 60 in. strip of sound damping material used to compensate for the thickness of the RC channel. RC Pads are used on ceiling joists where dRC-2 Channel will be installed. dRC-2 Channel is 72 in. lengths of resilient channel with added WallDamp damping. WallDamp Squares are used between the first and second layers of gypsum board. Acoustical Sealant is used to fill gaps where ceiling meets walls, and any HVAC or lighting openings. Sealant is also used to seal all gyspsum board seams.
Perimeter Gasket
Perimeter Gasket		 dRC-2 Channel
dRC-2 Damped Resilient Chanel
dRC Pads
dRC Pads		 WallDamp Squares
WallDamp Squares		 Acoustical Sealant
Acoustical Sealant


IsoCeiling for New Ceilings
IsoCeiling for New Ceilings		 IsoCeiling for Existing Ceilings
IsoCeiling for Existing Ceilings



How To Determine Quantity Needed

Determining the quantity you need is a simple three step process.
Step One: Measure your ceiling and create a small drawing to scale. Take the length parallel to the joists and divide it by 12. Subtract 2 from this number and you get the number of rows of dRC-2 Channel required. A 12 foot length will give you 10 rows. Take the length perpendicular to the joists divide it by 6 ft. (the length of each dRC-2 Channel). Round it off to the next highest multiple of 6. This gives you the number of Channel units per run. For a 10 foot run, the unit count would be 2 (Channel is easy to cut and must be overlapped). Now take your units per run and multiply that by the number of rows. For a 10 ft. x 12 ft. room, the total unit count would be 16. This leaves extra that can be shipped back to us for a refund if unused.

Step Two: Determine perimeter gasket quantity by adding up the sum of the perimeter measurements. For amount of WallDamp Squares determine the square footage and that gives you the number of Squares required. For amount of RC Pads, count each intersection where dRC Channel meets a joist. For a 10 ft. x 12 ft. room, the Pad count would be 48. Tubes of Acoustic Sealer cover up to 120 feet of run. One tube is enough for most small rooms. For medium sized jobs, order two.

Step Three: Call us and place your order. Any unused product can be returned for a full refund (shipping not included).		 IsoCeiling Ceiling Plan